How to Install Countertops?
Changing your kitchen countertop could work for a professional, but it really only requires a little muscle and footwork. A new counter can significantly improve the look and appearance of your kitchen without having to make major changes to cabinets or appliances.
Converting the countertop to a different material will make your entire kitchen feel fresh and new. So, how to install countertops?
Tools you need for Countertops installation
- Measuring tape
- Adjustable pliers
- Pen
- Tire lever
- Hammer
- Chisel
- Plastic
- Plastic sheets
- Masking tape
- Utility knife
- Silicon
Plumbing disconnection
Step 1
Close the water valve under the sink. If it is not there, you may need to turn off the main water supply.
Step 2
Detach the p-cover from the bottom of the sink using adjustable pliers.
Step 3
Place a plastic pan under the sink and remove the p-cover by removing it from the drain pipe.
Step 4
Disconnect the water supply lines that supply the tap from the wall. You can then remove the sink and faucet completely from the counter.
How to Install Countertops? | Disassembling the old kitchen Countertops
Step 1
Place the plastic paper on the floor, in the doorways, and anywhere you do not want debris and dust to fall. Tape the plastic down to prevent it from working.
Step 2
Pry the backsplash from the wall with a multiplication bar and hammer. Do not rush thinking that the plasterboard may be damaged.
Step 3
Once the backsplash is removed, you can start removing the machine. The floor benches will need to be removed and thrown out at a time. You can also try to crush grout lines to remove tiles. If you have a power circuit breaker, you can do it very quickly.
Installation of the new kitchen Countertops
Step 1
Measure the area for the new countertop. Decide whether to reuse the old washbasin or a new washbasin before you buy your countertops according to the sink you use. This is the most important step in the question of how to install countertops.
Step 2
You may need to strengthen the cabinets under the new countertop you have installed. Some old cupboards may not weigh the weight of a granite or marble countertops.
Step 3
Work on a silicone bead at the top of the cupboards and any area where the new countertop will rest.
Step 4
Carefully place the new countertop in the cupboards, making sure that the silicone is not contaminated. Press firmly when the machine is in place. Especially if you are installing granite or marble, you may need help lifting the countertops.
Step 5
Install the sink and reconnect the installation according to the manufacturer’s instructions.
This is how the kitchen counter is installed. In this content, we answered the question of how to install countertops for you. If you would like to receive professional support, please contact the K&B Cabinet team at the contact section.
